Verifying dmi pool data hang update success

Thank you to all of you who responded to my computer problem. I have finally identified the problem and have fixed it, here it is what I did. After weeks of testing the memory, running Memtest86 and others, switching the RAM memory sticks around with different combination, hitting the computer here and there hey, sometimes you get desperate!!

I did not have another computer with SATA hard drive to be able to test the 2 hardrives new that I tried to make work.

It turns out that the motherboard was faulty actually, it is still faulty , to be more specific, the SATA ports, all 6 of them on the motherboard do not work properly. How I know this? Well, I got tired of having a computer and not being able to use it, so one day on my way to work, I took it to a computer shop, so I could test and determine exactly what was wrong. The hard drive on computer was tested on another computer, recognized right away.

How is the computer fixed if SATA connections do not work? So what I did is use that same ribbon cable and connect it to the old hard drive, reformat it, and install Windows Vista. Of course, I set the hard drive as master and the DVD burner as slave.

Now the computer works just perfect. For the RAM that the computer had, I'm still using it, running it without any problems at all. Thanks to all of you that made recommendation and suggestions on what to do. I have learned much more about hardware components on my computer.

Thank you so much. If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem.

Also please exercise your best judgment when posting in the forums--revealing personal information such as your e-mail address, telephone number, and address is not recommended. Please note: Do not post advertisements, offensive material, profanity, or personal attacks. Please remember to be considerate of other members. All submitted content is subject to our Terms Of Use. I had an issue with the original hard drive it had, a GB drive, that for some reason it stopped working, at first appeared that hard drive died, but then I put it in an enclosure and it was working, but with limited access to certain files.

When there is hardware or software change that leads to component incompatibility, the error verifying DMI pool data would appear at Windows startup. In this case, you are unable to boot into Windows as normal. When you cannot boot into Windows, what you worry about most must be the important files you stored on your PC.

Well, the following will show you how to recover data from the PC with error verifying DMI pool data Windows 10 and how to fix the error with top 4 fixes. It is possible to recover data from the computer with verifying DMI pool data. Do you know how to make hard drive recovery?

This article will show you how to make hard drive recovery including data recovery and partition recovery. If you need to recover files from a computer that stuck on verifying DMI pool data, you can follow the steps below.

Step 1. Buy Now. Step 2. Step 3. Step 4. Then boot from the disk. Step 5. Step 6. After launching Data Recovery function, you can see all the detected disk partitions. Select a partition which contains important files and click Scan.

Step 7. I have gone to BIOS to find out if there is something wrong there again and to check if hard drive is detected, but I can see that hard drive is not detected at all.

Update Success Then nothing, the computer will not boot as it previously did. I have checked the BIOS settings for boot options and it is set up to boot from Hard drive, but there is something preventing it from doing it, which I cannot figure it out.

Any help or suggestions will be greatly appreciated. I have tried using the Windows Vista to "repair" but then it does not detect the hard drive. I don't know what it could be causing this error. I am posting this using Ubuntu Live CD. I have also used the utility on this CD to check the memory for any errors, but it came with no errors. Thank you. This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread.

I have the same question Report abuse. Details required :. Cancel Submit. Diana D. Hi Alredzen, Welcome to Microsoft Answers. This issue can be caused by any of the below reasons.

Followers 0. Recommended Posts. Posted March 27, Created an Image of the Set bios accordingly 5. Link to comment Share on other sites More sharing options Posted March 29, Posted April 12, Posted April 22, Posted April 25,